Citation: | CHENG Dong-mei, HAO Xiao-dong, YU Gang-qiang. A REVIEW ON THE RESEARCH OF POWDERING-RESISTANCE OF GALVANNEALED STEEL SHEETS[J]. Corrosion & Protection, 2007, 28(2): 82-85. |
[1] |
拉什尼科夫В.Ф.(俄).用连续热镀锌设备生产铁锌镀层薄钢板工艺的开发[J].先越蓉,译.世界钢铁,2004(3):59-60.
|
[2] |
Guttmann M,Lepretre Y,Aubry A.Mechanisms of the galvanizing reaction.Influence of Ti and P Contents in Steel and of Its Surface Microstructure After Annealing[C]//The Iron and Steel Society.In: Hartmann J E.The Use and Manufacture of Zinc and Zinc Alloy Coated Sheet Steel Products into 21st Century.Chicago:s.n.,1995:295-307.
|
[3] |
Jean-Michel Motaigne.汽车用合金化热镀锌钢板的最佳镀层微观结构[J].袁明生,译.世界钢铁,2001(6):19-23.
|
[4] |
张启富,刘邦津.IF钢合金化镀锌板镀层相结构对其性能影响研究的新进展[J].钢铁,2002,37(12):65-68,78.
|
[5] |
郝晓东,程东妹,张启富.超轻汽车车体用钢热镀锌的研究及应用现状[J].中国冶金,2006,16(12):5-8.
|
[6] |
张理扬,李俊,左良.合金化热镀锌高强IF钢镀层分析[J].东北大学学报(自然科学版),2005,26(3):232-235.
|
[7] |
Jordan C E,Goggins K M,Marder A R.Interfacial layer development in hot-dip galvanneal coatings on Interstitial Free (IF) steel[J].Metall & Mater Trans,1994,25A(10):2101-2109.
|
[8] |
庞华,陈秀芳,赵秉军.含Ti的合金化热镀锌钢板的镀层结构及相变规律的研究[J].金属热处理学报,1997,18(1):55-59.
|
[9] |
Nakamori T,Shibuya A.Effects of galvannnealing conditions and coating weight on powdering resistance of galvannealed steel sheet[C]//Corrosion-Resistant Automotive Sheet Steels.Chicago:s.n.,1988:139-149.
|
[10] |
Hisamatsu Y.Science and technology of zinc and zinc alloy coated steel sheet[C]//GALVATECH’89.Tokyo Japan: ISIJ,1989:3-12.
|
[11] |
Urai M,Terada M,Yamaguchi M,et al.Effect of aluminium on powdering characteristics of galvannealed steel sheet[C]//GALVATECH’89.Tokyo Japan: ISIJ,1989:478-484.
|
[12] |
Sakurai M,Zhang L W,Tajiri Y,et al.Effect of coating structure on powdering resistance of galvannealed steel sheet[J].Tetsu-to-Hagane,1991,77(7):978-986.
|
[13] |
Shi M S,Smith G M,Moore M,et al.Zinc based steel coating systems[C]//Metallurgy and Performance: The TMS Annual Meeting.Detroit Mich:s.n.,1990:387-390.
|
[14] |
Lin C S,Meshii M.Effect of steel chemistry on the microstructure and mechnaical properties of the commercial galvanneal coatings[C]//GALVATECH’95.Chicago Illinois:s.n.,1995:477-484.
|
[15] |
ALPAS A T,Inagaki J.Effect of microstructure on fracture mechanisms in galvannealed coatings[J].ISIJ International,2000,40(2):172-181.
|
[16] |
Lin C S,Mishii M.Effect of steel chemistry on the formation of the alloy layers on the commercial hot-dip coatings[C]//GALVATECH.Chicago Illinvois:s.n.,1995:335-342.
|
[17] |
张启富.现代钢带连续热镀锌[M].北京: 冶金工业出版社,2006.
|
[18] |
Nishimoto A,Inagaki J,Nakaoka K.Microtexture,grain boundary character distribution and secondary working embrittlement of high strength IF steels[J].Trans Iron Steel Inst Jpn,1986,26:807-818.
|
[19] |
Moon M B,Shin C S,Namkoong H W Oh and S.Effect of P content and texture of substrate on galvannealing behavior of hot dip galvannealed steel sheets[C]//GALVATECH’04.Chicago: s.n.,2004:475-480.
|
[20] |
Tang N Y.Characteristics of contimuous galvanizing baths[J].Metallurgical and Materials Transactions B,1999,30(B):144-148.
|
[21] |
(日)土歧保.钢中Si对合金化热镀锌钢板镀层界面结合强度的影响[J].高宏适,译.世界钢铁,2003(5):26-31.
|
[22] |
S.Feliu Jr.,Pérez-Revenga M L.Effect of alloying elements (Ti,Nb,Mn and P) and the water vapour content in the annealing atmosphere on the surface compositon of interstitial-free steels at the galvanizing temperature[J].Applied Surface Science,2004(229):112-123.
|
[23] |
S.Feliu Jr.,Pérez-Revenga M L.Correlation between the surface chemistry of annealed IF steels and the growth of a galvanneal coating[J].Acta Materialia,2005(53):2857-2866.
|
[24] |
Borzillo A R,Hahn W C.Growth of the inhibition aluminum-rich alloy layer on mild steel during galvanizing in zinc that contains aluminum[J].Trans ASM,1969,62:729-739.
|
[25] |
Ghuman A R P,Goldsein J I.Reaction mechanism for the coatings formed during the hot-dipping of iron in 0 to 10 pct Al-Zn baths at 450 to 700 ℃[J].Metall Trans,1971(2):2903-2914.
|
[26] |
Morimoto Y,Medevitt E,Meshii M.Characterization of the Fe-Al inhibition layer formed in the initial stages of hot –dip galvannealing[J].ISIJ International,1997,37(9):906-913.
|