Citation: | LUO Chao-yu, AN Jia-ju, WEI Xiao-wei. Mechanism Analysis of Rapid Forming Film on Aluminum Alloys by Anodic Oxidation with High Current Density[J]. Corrosion & Protection, 2008, 29(11): 681-683. |
[1] |
徐瑞东,王军丽,薛方勤,等.铝合金常温脉冲阳极氧化膜性能的研究[J].材料保护,2003,36:34-35,43.
|
[2] |
罗一帆,许旋,陈学文,等.铝合金硫酸阳极氧化工艺[J].电镀与涂饰,2004,23:33-35.
|
[3] |
Moutarlier V,Gigandet M P,Pagetti J,et al.An electro-chemical approach to the anodic oxidation of A1 2024 alloy insulfuric acid containing inhibitors[J].Surf Coat Techn,2002,161:267-270.
|
[4] |
Dasquet J P,Caillard D E.Investigation of the anodic oxide layer on 1050 and 2024T3 aluminum alloys by electron microscopy and electrochemical impedance spectroscopy[J].Thin Solid Films,2000,371:183-185.
|
[5] |
刘志坚,刘鸿康,贺子凯,等.铝合金快速阳极氧化工艺[J].电镀与涂饰,2001,20:39-42.
|
[6] |
任锐,贺子凯.铝阳极氧化新工艺的研究[J].电镀与涂饰,2003,22:11-13.
|
[7] |
安家菊,魏晓伟.大电流下铝合金快速阳极氧化工艺的研究[J].电镀与涂饰,2005(6):29-31.
|
[8] |
王平,魏晓伟.活塞阳极氧化表面气泡形成的机理及影响[J].材料保护,2005(10):54-57.
|
[9] |
魏晓伟,安家菊,王平.电源脉冲波形和冷却速度对发动机活塞硬质阳极氧化的影响[J].材料保护,2007(5):66-68.
|
[10] |
安家菊,魏晓伟,罗朝玉.大电流密度下活塞顶面的阳极氧化[J].腐蚀与防护,2007,28(12):623-625.
|
[11] |
王艳芝.铝及其合金阳极氧化技术研究的进展[J].材料保护,2001,34(9):22-23.
|